Monday, December 21, 2009

how to setup videolan (VLC) to use the atmolight module

1. get the latest videolan client for your platform www.videolan.org

2. install, start it and open the preferences


3. activate the atmolight module


4. configure the actual atmolight module


and if you are also using the light strips from DealExtreme, the following settings could be helpful to get a good whitebalance and nice overall response.
But still needs some adjustment.
just scroll a bit down in the atmolight modules preferences to find these settings


5. now just start a video and love it ... :D

4 comments:

  1. Hallo - die Seite müsste für den kommenenden VideoLAN 1.1.x Client überarbeitet werden - da hat sich ein bisschen was geändert - was evtl. der Erwähung wert ist.

    (http://nightlies.videolan.org/build/win32/ dort müsstest du ne Version von trunk-? zum aktuellen Datum nehmen)

    Die Konfiguraton/Auswahl der Hardware wurde geändert, sowie die Konfiguration zur Einrichtung der Bildbereiche (Zonen)

    Igor from vdr-portal / Atmo - VideoLAN

    ReplyDelete
  2. super, danke ... werd ich mir mal anschauen

    ReplyDelete
  3. How do apply this to a tv without having a laptop or cpu connected?

    ReplyDelete
    Replies
    1. If this is arduino based then all you would have to do is load in settings and to calibrate the device then all it needs would need happen is have dedicated power to the board

      Delete